Add:702, Block B, Zhongde Plaza, Rencheng District, Jining City, Shandong Province, China
Loose Lay Kitchen Flooring
Loose lay kitchen flooring Self-sinking floor construction specifications and steps 1. Cleaning of the ground: Polishing the ground to eliminate the unevenness of the ground, scale and other substances that will affect the flatness of the floor, and remove dust. 2. Ground stocking and stakeout:...Chat Now
Loose lay kitchen flooring
◆ Moisture resistant. There is no swelling due to moisture and moisture.
◆ Environmental friendly. Do not use ophthalmic acid ester additives that are harmful to the body; minimize the amount of volatiles and formaldehyde.
◆ Quick and easy construction. No need to use adhesives; strong bonding.
◆ Wear and scratch resistance: the surface wear layer is specially treated, and the wear resistance is better.
◆ Insulation: It is made of insulating materials and has high insulation. People stand on the floor to avoid accidents in which the human body is exposed to electric shock due to accidents.
◆ Simple maintenance: The surface of the product has special treatment, good waterproof and anti-staining properties, no penetration, and can be cleaned by using ordinary wet cloth.
◆ No need to brush glue, green and environmental friendly, can be directly laid on the ground, saving room height, seams are tighter, and can be repeatedly disassembled and utilized, economical and practical
Self-sinking floor construction specifications and steps
1. Cleaning of the ground: Polishing the ground to eliminate the unevenness of the ground, scale and other substances that will affect the flatness of the floor, and remove dust.
2. Ground stocking and stakeout: Determine the ground center point at the site, determine the starting point of the laying, geometrically determine the vertical bisector, and then use the ink fountain to pop out two mutually perpendicular baselines. When paving, the baseline starts to be block by block. All around.
3. Flooring: A: Before laying the floor, it is necessary to lay a box of flat floor to make the surface of the floor tile fully flat and adapt the floor to the temperature of the construction environment.
B. When laying the first floor, the first floor should be fixed on the laying line with double-sided tape, then start to spread the tiles to each side by block, each seam must be tight and aligned.
C: Suitable temperature for paving is about 5-20 ° C.
4. Patchwork inspection
5. Edge cutting
6. Site cleaning
7. Rubber seal